|
Tandem: Welcome to the new Tandem® High Performance Video Receiver. Lentequip's new solution to a non-compromising companion for your CanaTrans® or other high-end UHF(NTSC/PAL) / Cable reception requirements. Since introducing our CanaTrans®, we have been repeatedly asked for our recommendations for an equivalent uncompromising receiver. The only true solution was to design and build one ourselves to the same exacting high standards already set by the CanaTrans®. The Tandem® was designed from the ground up meaning that inside you will not find cheap receiver modules that are commonly installed into other company's receivers. By building a receiver from a discreet proprietary design, Lentequip has been able to provide you with a level of sensitivity and performance only matched by rack-mounted units costing as much as 20 times more! The simple interface allows the user to easily navigate through the channels. At a touch of a button you can store or delete commonly used channels. There is no need for any tools to switch channels - just read the details right off the large back-lit dot-matrix screen. Power cable compatibility is assured if you already own a CanaTrans®. Thanks to the frequency agile characteristics of the Tandem, reception is possible just about anywhere in the world in either UHF (NTSC/PAL) as well as most cable channel offsets. Microprocessor based technology allows for future upgrades when necessary
Set consisting of:
Tandem video receiver, 2 x antenna, manual and mounting plate;
various cables on request;
RF design
Multi-band tuning (VHF/UHF/Cable)RF sensitivity meter allows precise antenna fine tuning adjustment - a first!Front panel antenna/cable selectionState-of-the-art RF components and designFrequency synthesized channel selectionBNC antenna input connectorOne model covers most RF standards worldwide
Interface & Control
Microprocessor controlled unitAdd/Remove channel preset list Intuitive menu based graphical interfaceFactory customized ownership information (just like on the CanaTrans)One-button reset for all user-configurable parametersRugged custom switch overlay for interfacing with the Tandem®Display viewable in direct sunlight
Video
BNC output, 1V p-p into 75 OhmsCarrier absent detection
Power
5-30V input power operating rangeOptional Sony battery plate for use with NP-QM71(91)D batteriesBattery capacity icon
Audio
Adjustable audio gain, 0, -6dB, mute
Audio trap filter selectable
Construction
- Quality, industry standard Fischer input connectors
- Ruggedly shielded interior assembly designed to comply with RF emission standards
- 118mm(l) x 90mm (w) x 37mm (d)
- 4.6" (l) x 3.5" (w) x 1.5" (d)
Input RF
Tuning range: 52-820MHzSupported standards: UHF&CATV (most countries) - NTSC/PALSupported input levels: -57dBm to+10dBm - the Tandem® has special front-end attenuation
for high input signal levels, manual or auto selectedInput sensitivity: -77dBm with video S/N <26dB1st IF frequency: 939.75MHz2nd IF frequency: 45.75MHz NTSC, 38.75MHZ PALInput BNC return loss: >14dB @50 Ohms, >12dB @ 75 OhmsVideo output: BNC, 75 Ohms, return loss >30dBFrequency response: 0dB - 3.58MHz, -2dB up to 4.2MHzNonlinear distortions: Diff. gain <5%, diff. phase <2%Specifications subject to change without notice
Audio
- Audio output: Fischer 2 pin, 600 Ohms
- Audio level: 300mV p-p @ 1KHz, mono
- Frequency response: 20Hz - 15kHz
- Audio S/N: >55dB
- Level control: 0, -6dB, mute
Optional
Transvideo Hermes: Hermes™ is one of the first truly portable professional wireless tuner (0.9lb.). The new UHF/VHF multi-channel tuner can be used in conjunction with any monitor. Hermes™ reception is highly stable thanks to the digital tuning and true synchronous demodulator. Hermes™ is universal: it receives 8-28v DC power in 3 different ways: via an XLR4 plug or a Hirose 6 connector and it will run for over 8 hours on 8 AA batteries. Price: EUR. 999,00
| Available Options:
|
| Prio Support: |
|
|
